home zone is proud to present the stunning new curtain system from Silent Gliss. The exciting Wave system is suitable for straight or bay window applications and offers the ultimate in cool contemporary window fashions. The glider-cord is contained within the curtain track allowing the curtain to hang in a smooth, simple and continuous ‘Wave’ effect. As an alternative to traditional pinch, pencil pleat or goblet style headings, Wave offers a more contemporary curtain presentation with the economy of standard ruffling tape.

What makes WAVE so unique

• When completely closed or part open, the curtains offer a smooth, continuous wave effect.

• The Wave heading stacks back neatly, taking up less space than most traditional headings.

• The Wave glider-cord is not visible when the curtain is fully closed.

• The simple yet stylish design of the Wave heading means curtains are easy to make up with the Silent Gliss special cordless 70mm tape. Sewn along the top of the curtain, the pockets are in exactly the right position for the track system.

• Depending on the fullness selected, Wave can be as economical as standard pencil pleat curtains, but far more stylish!

• When taken down, the curtain is flat for easier cleaning.

A special glider-cord is contained within the curtain track; this limits the extension of
the curtain fabric, creating a smooth and continuous Wave effect.

1. Special glider-cord available with either 60mm spacing or for fuller curtains, 80mm spacing.
   

   ---

    

2. Special flat 75mm tape designed to hang perfectly below the track.
   

   ---

    

3. Selected tracks for that perfect finish.

Hand drawn 6380 track	Cord drawn 3840 track
Hand or cord drawn Metropole	Electrically operated 5100 track

Standard curtain hooks are used in the back of the tape.

It is important to note that the Wave system is only suitable for use with Silent Gliss rails as they are fitted with the special glider-cord to create this stunning effect.

The curtains MUST hang beneath the rail so as not to obstruct the smooth appearance and operation of the Wave system.

Before ordering, decide on your preferred fullness using the chart shown here. Using 80mm glider spacing with 160mm hook spacing will give the most open, flowing heading, whereas 60mm glider spacing with 100mm hook spacing gives the tightest waves.

These figures are only approximate and in practice they may vary slightly.